Adjusting Balance (Between Left And Right); Adjusting Fader (Between Front And Rear); Setting The Bass Level; Setting The Treble Level - Alpine iLX-700 Owner's Manual

5
Touch [ ] to return to the main application screen.
Touch [ ] to return to the previous screen.
• Immediately after changing the Audio Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to operate the list screen, refer to page 9.
About TuneIt
You can also set the Audio Setup of this unit through the TuneIt App
installed to your iPhone.
It is also possible to download specific parameters for certain vehicles
from Alpine's TuneIt database.
Using the TuneIt App, customized parameters can also be uploaded for
others to share and rate.
In Sound control mode, "TuneIt connected." is displayed on the Audio
Setup screen, and you cannot perform any operation.
• TuneIt is downloadable from Apple's App Store.
• Time Correction, Crossover and Parametric EQ can be set only
through the TuneIt App.
• Also refer to "Applying TuneIt" on page 10.
Adjusting Balance (Between Left and
Right)
Adjust the right and left speaker volumes.
Setting item: Balance
Setting contents: L (left) 15 to R (right) 15 (Initial setting: 0)
Adjusting Fader (Between Front and
Rear)
Adjust the front and rear speaker volume.
Setting item: Fader
Setting contents: F (front) 15 to R (rear) 15 (Initial setting: 0)

Setting the Bass Level

You can emphasize or weaken the bass level.
Setting item: Bass
Setting contents: -7 to +7 (Initial setting: 0)

Setting the Treble Level

You can emphasize or weaken the treble level.
Setting item: Treble
Setting contents: -7 to +7 (Initial setting: 0)

Setting the Subwoofer

Turning Subwoofer ON/OFF

If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: Subwoofer
Setting contents: ON / OFF (Initial setting: OFF)

Adjusting the Subwoofer Level

You can set the Subwoofer level when a Subwoofer is connected.
Setting item: Subwoofer Level
Setting contents: 0 to 15 (Initial setting: 0)

Setting the Subwoofer Phase

The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: Subwoofer Phase
Setting contents: 0° / 180° (Initial setting: 0°)

Setting the Bass Engine SQ

Bass Engine SQ is used to easily add impact of varying levels to your
music. Using the different levels available, the Bass impact can be
tweaked to conform to the type of music being tuned.
• Using the TuneIt App, you can download the optimal Bass Engine SQ
tuning data for your speaker system.

Turning the Bass Engine SQ ON/OFF

Set to "ON" to use the Bass Engine SQ function.
Setting item: Bass Engine SQ
Setting contents: OFF / ON (Initial setting: OFF)
19
-EN