Using The Cassette Deck (Listening To A Tape); One Touch Play; Regular Play - JVC Compact Component System CA-D302T Instructions Manual

Using the Cassette Deck
(Listening to a Tape)
Cassette Deck
control buttons
This illustration shows
the Remote Control for
CA-D352TR. The
Remote Control for
CA-D302T does not
print the PTY/EON
and DISPLAY MODE
labels.
Display
CONT. RANDOM
ALL PRGM
: Tape Direction indicator
: DECK A, B indicator
: Reverse Mode indicator
22
0 Eject (Deck A)
kHz
MHz
A.BASS EX S.MODE
TA NEWS INFO EON
CLOCK ST
REC SLEEP MONO
The Cassette Deck allows you to play, record and dub audio tapes.
o With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play ——————————————————————
By pressing the TAPE ™ £ button (or the ™ or £ button on the Remote Control), the Unit will turn
on, "TAPE" appears on the display, and if a tape is in the deck, it will start to play. If no tape is loaded, the
Unit will turn on and wait for you to insert a tape, or select another function.

Regular Play

When the power is already on, you can use this basic procedure:
1. Press the 0 button for the deck you want to use.
2. When the cassette holder opens, put a cassette in, with the
exposed part of the tape down, toward the base of the System.
If the cassette holder does not open, turn the power off, then back on and press the 0 button again.
•
REPEAT
DISC
RANDOM
DISC
CONTINUE
DISC
0 Eject (Deck B)
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected
tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between
blinking slowly and quickly repeatedly.
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
• This illustration is of CA-
D352TR. CA-D302T does
not have the DISPLAY
MODE, PTY/EON, and
SELECT –, + buttons.
MULTI CONTROL
TAPE ™ £
When TAPE is selected
as the source, the button
lights up.
7 STOP
REVERSE MODE
DECK A/B