Zone Configuration: Advanced Settings - Cisco TelePresence Video Communication Server Administrator's Manual

Field Description
SIP Determines whether SIP calls are allowed to
mode systems and endpoints located using DNS
lookups via this zone.
TLS Controls whether the VCS performs X.509
verify certificate checking against the destination
mode system server returned by the DNS lookup.
Zone Determines how the zone's advanced settings
profile are configured.
Default: uses the factory defaults.
Custom: allows you to configure each setting
individually.
Preconfigured profiles: choose one of the
preconfigured profiles to automatically use the
appropriate settings required for connections to
that type of system.
The default is Default.

Zone configuration: advanced settings

The table below describes the Advanced and Custom zone configuration options. Some of these
settings only apply to specific zone types.
Note: you should only use the Custom zone profile settings on the advice of Cisco customer support.
Cisco VCS Administrator Guide (X6.1)
Zones and neighbors
Usage tips
This setting only applies if the DNS
lookup specifies TLS as the required
protocol. If TLS is not required then the
setting is ignored. See TLS certificate
verification of neighbor systems
information.
See Zone configuration: advanced
settings for details on the Advanced
settings.
Do not use the Custom option or
configure the individual Advanced
settings except on the advice of Cisco
customer support.
for more
Page 93 of 401