Ethernet Status - Cisco TelePresence Video Communication Server Administrator's Manual

Field Description
Software The version of software that is currently installed on the VCS.
version
Software The build number of this software version.
build
Software The date on which this version of the software was released.
release
date
Software The internal reference number for this software release.
name
Software The maximum number of calls, and the availability of additional VCS features such as
options FindMe™, Device Provisioning and Dual Network Interfaces, are controlled through the
use of option
VCS.
Hardware The version number of the hardware on which the VCS software is installed.
version
Hardware The serial number of the hardware on which the VCS software is installed.
serial
number
Time information section:
Up time The amount of time that has elapsed since the system last restarted.
System The time as determined by the NTP server.
time If no NTP server has been configured, this will show Time Not Set.
(UTC)
Time The time zone that has been configured on the Time page.
zone
Local If an NTP server has been configured, the system time in local time (UTC adjusted
time according to the local time zone) is shown.
If no NTP server has been configured, the time according to the VCS's operating system
is shown.

Ethernet status

The Ethernet page (Status > System >
VCS.
The page displays the following information for the LAN 1 port and, if the Dual Network Interfaces
option key has been installed, the LAN 2 port:
Field Description
MAC The MAC address of the VCS's Ethernet device for that LAN port.
address
Cisco VCS Administrator Guide (X6.1)
keys. This section shows all the optional features currently installed on the
Ethernet) shows the MAC address and Ethernet speed of the
Overview and status information
Page 27 of 401