Toshiba TOSVERT VF-AS1 Instruction Manual page 4

Manual for cc-link option - ccl001z
Hide thumbs Also See for TOSVERT VF-AS1:
Table of Contents

Advertisement

■ Wiring
▼ Turn off input power before installing and wiring this option.
Wait at least 15 minutes and check to make sure that the charge lamp (VF-AS1) is no
longer lit.
Mandatory
▼ Tighten the screws on the terminal block to the specified torque (Refer to Section 3.2).
If the screws are not tightened to the specified torque, it may lead to fire.
▼ Electrical construction work must be done by a qualified expert.
Installation or connection of input power by someone who does not have that expert
knowledge may lead to fire or electric shocks.
■ Operations
▼ Do not touch switches when the hands are wet and do not try to clean the inverter
with a wet cloth.
It may lead to electric shocks.
Prohibited
▼ Do not pull on any cable itself.
It may lead to damage or malfunction.
■ Disposal
▼ If you dispose off this unit, have it done by a specialist in industrial waste disposal*.
Improper disposal may result in explosion of capacitors or produce noxious gases,
resulting in injury.
Mandatory
(*) Persons who specialize in the processing of waste and known as "Industrial Waste
Product Collectors and Transporters" or "Industrial Waste Disposal Persons." If the
collection, transport and disposal of industrial waste is done by someone who is not
licensed for that job, it is a punishable violation of the law (Laws in regard to cleaning
and processing of waste materials).
Notes on use
▼ Avoid installing in a place where ambient temperature or/and humidity change sharply.
▼ Keep the communication cable separate and from the power cable of the inverter to
prevent the inverter from malfunctioning due to electromagnetic noise.
Please make grounding of a network SLD terminal different from grounding an inverter
and a motor. It becomes the cause of the malfunction by the noise.
▼ Insert a magnetic contactor or similar device between the inverter and the power
supply to ensure that power is turned off if an emergency stop command is entered
through the externally.
Danger
Danger
Warning
Notes
- 3 -
E6581286②

Advertisement

Table of Contents
loading

Table of Contents