Draytek Vigor2912 Series User Manual page 291

Hide thumbs Also See for Vigor2912 Series:

Table of Contents

RIP Direction - The option specifies the direction of RIP

(Routing Information Protocol) packets. You can

enable/disable one of direction here. Herein, we provide

four options: TX/RX Both, TX Only, RX Only, and

From first subnet to remote network, you have to

If the remote network only allows you to dial in with

single IP, please choose NAT, otherwise choose Route.

Change default route to this VPN tunnel - Check this box

to change the default route with this VPN tunnel.

After finishing all the settings here, please click OK to save the configuration.

Vigor2912 Series User's Guide