Draytek Vigor2912 Series User Manual page 180

Branch to other Filter Set
Sessions Control
MAC Bind IP
Quality of Service
Load-Balance policy
User Management
APP Enforcement
Vigor2912 Series User's Guide
passed immediately.
Block If No Further Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Pass If No Further Match - A packet matching the rule,
and that does not match further rules, will be passed
through.
If the packet matches the filter rule, the next filter rule will
branch to the specified filter set. Select next filter rule to
branch from the drop-down menu. Be aware that the router
will apply the specified filter rule for ever and will not
return to previous filter rule any more.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.
Strict –Make the MAC address and IP address settings
configured in IP Object for Source IP and Destination IP
be bound for applying such filter rule.
No-Strict - no limitation.
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Choose the WAN interface for applying Policy Route.
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall
rule will be applied to the user/user group/all users specified
here.
Note: When there is no user profile or group profile existed,
Create New User or Create New Group item will appear
for you to click to create a new one.
Select an APP Enforcement profile for global IM/P2P
application blocking. If there is no profile for you to select,
please choose [Create New] from the drop down list in this
page to create a new profile. All the hosts in LAN must
follow the standard configured in the APP Enforcement
profile selected here. For detailed information, refer to the
section of APP Enforcement profile setup. For
170