Storage Unit Replacement - Panasonic JS-960WP Series Operating Instructions Manual

Storage Unit Replacement

Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
*Make sure to ground the unit before starting this work.
(1) Grasp the tab on the left side of the filter and pull it towards you to remove the filter.
p Do not use excessive force to open the filter.
p There is also a hook in the center, so pull the filter gently towards you.
(2) Remove the screw (1 piece) that secures the HDD cover, and then remove the HDD
cover.
(3) Pull the eject lever of the storage unit and remove the storage unit slowly.
(1)
(3)-2
26
(2)
HDD cover
(3)-1