Switch Check (2); Led Check; Self Diagnosis Code - Sony Cyber-shot DSC-P71 Service Manual

4. Switch Check (2)

Page 2 Addresses 90, 91, 92, 94
Using method:
1) Select page: 2, addresses: 90, 91, 92 and 94.
2) By discriminating the dispaly data, the pressed key can be
discriminated.
Address
00 to 0C
MODE DIAL
90
(SET UP)
(MODE DIAL)
(PK-064 board) (PK-064 board) (PK-064 board) (PK-064 board) (PK-064 board)
(IC401 tf)
(S258)
91 CONTROL DOWN
(KEY AD0) (PK-064 board) (PK-064 board) (PK-064 board)
(IC401 tg) (S253)
92 CONTROL RIGHT CONTROL LEFT CONTROL SET
(KEY AD1) (PK-064 board) (PK-064 board) (PK-064 board)
(IC401 th) (S253)
94 ZOOM (W)
(KEY AD3) (PK-064 board) (PK-064 board)
(IC401 tk) (S252)

5. LED Check

Page 2 Address 04
Using method:
1) Select page: 2, address: 04, set data: 02, and press the PAUSE
button of the adjusting remote commander.
2) Check that all LED except for the ACCESS LED are lit and all
segments of LCD (display window) are lit.
3) Select page: 2, address: 04, set data: 00 and press the PAUSE
button of the adjusting remote commander.

6. Self Diagnosis Code

Display Code Countermeasure
C:32:ss Turn the power off and on again.
Format the "Memory stick".
C:13:ss
Insert a new "Memory Stick".
E:61:ss Checking of lens drive circuit.
Checking of flash unit or replacement
E:91:ss
of flash unit.
Insert a battery pack correctly.
E:92:ss
Turn the power off and on again.
0D to 27 28 to 48
MODE DIAL MODE DIAL
(MOVIE) (PB)
(S258) (S258)
CONTROL UP MENU
(S253) (S255)
(S253) (S253)
ZOOM (T)
(S254)
Data 02
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
When failed in the focus and zoom
initialization.
Abnormality when flash is being
charged.
Battery pack is not inserted correctly.
Battery pack was installed or removed
when using the AC adaptor.
5-43 E
Data
49 to 73 74 to A5
MODE DIAL MODE DIAL
(CAMERA) (NIGHT)
(S258) (S258)
DISPLAY/LCD
ON/OFF
(PK-064 board)
(S256)
Cause
5-43
DSC-P71/P71M
A6 to DC DD to FF
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
—