Clutch Hub Inspection; Driven Sprocket Assembly; Driven Sprocket And Drive Chain Installation - Yamaha Libero Workshop Manual

L-164
DRIVE CHAIN AND SPROCKETS

CLUTCH HUB INSPECTION

1. Inspect :

DRIVEN SPROCKET ASSEMBLY

1. Install
NOTE :
Tighten the Nuts in a crisscross pattern
2. Bend :
DRIVEN SPROCKET AND DRIVE CHAIN
INSTALLATION
1. Install :
NOTE :
Align the slot on the Swingarm with the flat face
of the Driven Sprocket Axle.
2. Tighten :
6-18
CHAS
Clutch Hub
Wear/damage/cracks Ÿ Replace
• Driven Sprocket ¿ on Clutch Hub
• Lock Washer À New
• Nut Á
Nut (Driven Sprocket ):
26 Nm (2.6 m.kg, 19 ft.lb)
Lock Washer Tab ¿
(along a flat side of the end)
• Chain Tensioner
• Driven Sprocket Axle ¿ with Drive
Sprocket Assembly
Nut (Driven Sprocket Axle) ¿
Nut (Driven Sprocket Axle) :
91 Nm (9.1 m.kg, 66 ft.lb)