Changing The Initial Language Settings; Changing The Various Audio Settings - JVC 0303MWMMDWJEM Instructions Manual

Changing the Initial Language Settings

On the LANGUAGE menu, you can select the following
initial languages.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
• MENU LANGUAGE:
Select the initial language for the DVD disc menu.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 69.)
• AUDIO LANGUAGE:
Select the initial language for audio sound language.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 69.)
• SUBTITLE:
Select the initial language for subtitles.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 69.)
• ON SCREEN LANGUAGE:
Select the language for the on-screen menus and
indications. (See also page 13.)
Selectable languages—ENGLISH,
ESPAÑOL (Spanish)
The original language will be selected as the initial
language regardless of your setting in the following
case:
– If the language you have selected is not recorded on the disc.
– If the disc is programed to be played back in the original
language.
57
ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
(Chinese),

Changing the Various Audio Settings

On the AUDIO menu, you can change the following sound
settings.
DIGITAL AUDIO OUTPUT
DOWN MIX
COMPRESSION
PRESS KEY
• DIGITAL AUDIO OUTPUT:
Set the output signal type through the DVD OPTICAL
DIGITAL OUT terminal. (See also page 16.)
– Select "STREAM/PCM" when connecting an
amplifier or a decoder compatible with Dolby Digital,
DTS*, and MPEG Multichannel.
– Select "PCM ONLY" when connecting an amplifier
compatible only with Linear PCM, or a digital
recording device such an MD recorder, DAT deck, etc.
– Select "DOLBY DIGITAL/PCM" when connecting
an amplifier or a decoder compatible only with Dolby
Digital.
* This unit does not have the DTS decoding function.
To listen to DTS encoded sound, connect a DTS decoder
or a DTS compatible amplifier.
• DOWN MIX:
When playing a DVD whose audio sound is recorded
with the multichannel surround, this unit properly
converts the sound signals into 2-channels.
Set this item according to your audio system.
– Select "Lt/Rt" when connecting an amplifier with the
surround decoder.
– Select "Lo/Ro" when listening to the playback sound
through the speaker connected to this unit or when
recording on this unit.
Also select "Lo/Ro" when connecting an amplifier
without the surround decoder or a digital recording
device.
More about DOWN MIX
• The DOWN MIX function does not work when the 3D
PHONIC function is activated. (See page 48.)
• The DOWN MIX setting does not affect DTS signals.
STREAM/PCM
Lo / Ro
OFF
EXIT