Chapter 8
System Status Check
Check the status of the ETERNUS DX on the ETERNUS Web GUI screen or ETERNUS CLI.
8.1
Component Status Check
The status of the ETERNUS DX can be checked by general status in the upper left of the ETERNUS Web GUI
screen.
When the general status image is "
image is other than "
NUS DX. Check the status of each component on the [Storage] screen.
If there is a component in Warning or Error status, contact your sales representative or maintenance engi-
neer.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
", the ETERNUS DX is in normal status. When the general status
" ("
", "
", etc.), an abnormality has been detected in the ETER-
129
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0