Remove The C1-Board; Remove The C2-Board; Remove The Plasma Panel Section From The Cabinet Assy - Panasonic TC-P42G25 Service Manual

8.14. Remove the C1-Board

1. Remove the Hanger metal R and the One leg bracket.
(See section 8.12.)
2. Remove the Cabinet mount metal bottom (See section
8.13.).
3. Remove the flexible cables holder fastening screws (×12
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×4

8.15. Remove the C2-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the One leg bracket.
(See section 8.12.)
3. Remove the Cabinet mount metal bottom. (See section
8.13.)
4. Remove the flexible cables holder fastening screws (×10
).
5. Disconnect the flexible cables (CB9, CB10, CB11, CB12,
CB13, CB14 and CB15).
6. Disconnect the flexible cables (C20 and C21).
7. Disconnect the connectors (C23 and C25).
8. Remove the screws (×4
) and remove the C1-Board.
) and remove the C2-Board.
8.16. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Remove the cabinet mount metals fastening screws (×7
).
2. Remove the cabinet assy and the plasma panel fastening
, ×8
screws (×3
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
25
).