Video Setup - Philips DCD8000 User Manual

[Audio Sync]
When you play a video disc, set the default
delay time for audio output.
1) To start, press OK.
2) Select a speaker delay in the menu, then
press / to set the delay time.
3) Press OK WR FRQÀUP DQG H[LW
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
‡ [On] – enjoy quiet viewing at night
(DVDs only).
‡ [Off] – enjoy surround sound with
its full dynamic range.

Video setup

On the [Video Setup] page, you can set the
following options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
‡ [PAL] - For PAL-system TV.
‡ [Multi] - For TV that is compatible with
both PAL and NTSC.
‡ [NTSC] - For NTSC-system TV.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
‡ [4:3 Pan Scan] – For 4:3 screen TV:
full-height display with the trimmed
sides.
26 EN
16:9 (Wide Screen)
‡ [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars
on the top and bottom of the screen.
‡ [16:9 Wide Screen] – For wide-
screen TV: display ratio 16:9.
[Picture Settings]
6HOHFW D SUHGHÀQHG VHW RI SLFWXUH FRORU
settings.
‡ [Standard] – Original color setting.
‡ [Vivid] – Vibrant color setting.
‡ [Cool] - Soft color setting.
‡ [Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK.
[HDMI Setup]
When you connect this apparatus and TV
with an HDMI cable, select the best HDMI
video setting that your TV supports.
‡ [HDMI Video] – Select a resolution for
KLJK GHÀ QLWLRQ YLGHRV
‡ [Wide Screen Format] – Select a display
format for wide screen videos.
‡ [HDMI Deep Color] – Create vivid
images with more color details when the
video content is recorded in Deep Color
and the TV supports this feature.
‡ [EasyLink Setup] – This unit supports
Philips EasyLink which uses the HDMI
CEC (Consumer Electronics Control)
protocol. You can use a single remote
control to control EasyLink compliant
devices that are connected through
HDMI.
‡ [EasyLink] - Enable or disable the
EasyLink feature.
‡ [One Touch Play] - After you enable
this feature, the connected HDMI
CEC TV automatically switches to
the HDMI input channel when you
play a disc.
‡ [One Touch Standby] - After you
enable this feature, you can press
and hold
on the remote control