Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips DCD8000 User Manual

7 Listen to radio

The unit can automatically search and store
radio stations (see "Get started" > "Store radio
stations automatically"). You can also search and
store radio stations manually.

Tune to a radio station

1
Press RADIO.
2
Press and hold
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
‡ To tune to a weak station, press
/ UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.
Tip
‡
[STEREO] is the default setting for tuner mode.
‡
In tuner mode, you can press OK repeatedly to
switch between [STEREO] and [MONO]. The
unit memorizes your setting even if you turn off
the unit or turn to other sources.
Program radio stations
automatically
Note
‡
You can program a maximum of 20 preset radio
stations.
1
Press and hold PROGRAM for 2 seconds
to activate automatic programming.
» [AUTO] DXWR LV GLVSOD\HG EULHÁ\
» All available stations are programmed
in the order of waveband reception
strength.
22 EN
/ for more than 2
» 7KH ÀUVW SURJUDPHG UDGLR VWDWLRQ LV
broadcast automatically.
Program radio stations
manually
Note
‡
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROGRAM to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM WR FRQÀUP
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
‡
To overwrite a programmed station, store
another station in its place.