Basic Operating Procedure For Zone 1 - JVC RX-8040B Instructions Manual

Basic Operating Procedure for Zone 1

On the front panel:
1
2
3
1. Press STANDBY/ON.
The STANDBY lamp goes off, and the ZONE 1 indicator lights
up on the display.
The buttons and controls on the unit work for Zone 1 operations.
• For more details, see "Turning the Power On and Off
(Standby)" on page 19.
The last Zone 1 source appears.
ANALOG
L R LINEAR PCM
The last Surround/DSP mode
appears.
2. Press one of the source selection buttons to select
a source and start playback.
The sound comes out of the Zone 1 speakers.
• For more details, see "Selecting the Zone 1 Source to Play" on
page 20.
3. If no sound comes out of the front speakers, press
SPEAKERS ON/OFF 1 and/or SPEAKERS ON/
OFF 2/ZONE2 which you want to use.
The selected front speaker indicator(s) light(s) up on the display.
• For more details, see "Activating the Zone 1 Front Speakers"
on page 21.
4. Turn MASTER VOLUME to adjust the volume
level of the sound through the Zone 1 speakers.
• For more details, see "Adjusting the Zone 1 Volume" on page
21.
4
The ZONE 1 indicator lights up.
SPEAKERS 1
VOLUME
ZONE 1
The volume
level appears.
On the remote control:
1
1. Set ZONE 1/ZONE 2 selector to ZONE 1.
Now the buttons on the remote control work for Zone 1
operations.
2. Press AUDIO POWER ON.
The STANDBY lamp goes off on the front panel, and the
ZONE 1 indicator lights up on the unit's display.
• For more details, see "Turning the Power On and Off
(Standby)" on page 19.
3. Press one of the source selection buttons to select
a source and starts playback.
The sound comes out of the Zone 1 front speakers.
• For more details, see "Selecting the Zone 1 Source to Play" on
page 20.
• If no sound comes out of the front speakers, press SPEAKERS
ON/OFF 1 and/or SPEAKERS ON/OFF 2/ZONE2 on the front
panel.
The selected front speaker indicator(s) light(s) up on the unit's
display. For more details, see "Activating the Zone 1 Front
Speakers" on page 21.
4. Press VOLUME +/– to adjust the volume level
through the Zone 1 speakers.
• For more details, see "Adjusting the Zone 1 Volume" on page
21.
2
3
4
17