Product Specifications - Kinetico 2030s Owner's Manual

Product Specifications

Model
Certified flow rate
@ 15 psi (or less)
Peak flow rate @
30 psi (or less)
Resin per tank,
in cubic feet
Resin per tank, in liters
Capacity per cycle,
in grains @ salt used per
cycle setting pounds
Capacity per cycle, in
grams @ salt used per
cycle setting kilograms
Grains exchanged
per pound of salt used
Grains exchanged per
kilograms of salt used
Max. flow rate to drain
during regenerations
Min./Max. operating
pressure
Min./Max. operating
temperature
Max. working
pressure in psi
* Meets California efficiency requirements of 4000 grains exchanged per pound of salt used. Efficiency is only
certified at the low salt dosage and was determined in accordance with NSF/ANSI 44.
Sodium Information: Systems using sodium chloride for regeneration will add sodium to the water. The
amount of sodium added is proportionate to the amount of hardness removed. People who are on sodium-
restricted diets should consider the added sodium as part of their overall sodium intake.
Inlet Hardness
171 mg/L (10 gr)
342 mg/L (20 gr)
513 mg/L (30 gr)
1192 mg/L (40 gr)
Kinetico reverse osmosis systems will remove as much as 98 percent of sodium content in the water. Using
potassium chloride as a regenerant will not add sodium to the water.
18
2030s 2040s with
Overdrive
2040c with
Overdrive
9 gpm 11 gpm
34.1 Lpm 41.6 Lpm
16.5 gpm 15 gpm
62.5 Lpm 56.7 Lpm
0.47 0.4
13.3 11.3
7867 @ 1.8* 5222 @ 1.0*
9802 @ 2.7
509 @ 0.81* 338 @ 0.45*
635 @ 1.2
4371 @ 1.8* 5222 @ 1.0*
3630 @ 2.7
628 @ 0.81* 751 @ 0.450*
529 @ 1.2
0.69 gpm 1.5 gpm
2.6 Lpm 5.7 Lpm
103.4 - 861.9 kPa
15 - 125 psi
2 - 49°C
35 - 120°F
861.9 kPa
125 psi
Sodium Added
79 mg/L
149 mg/L
223 mg/L
298 mg/L
2050s 2060s
2050c
(Europe
only)
7 gpm 11.6 gpm
26.5 Lpm 43.9 Lpm
15 gpm 30 gpm
56.7 Lpm 113.5 Lpm
0.4 0.7
11.3 19.8
5222 @ 1.0* 12,481 @ 2.7*
15,817 @ 4.0
338 @ 0.45* 809 @ 1.23*
1025 @ 1.8
5222 @ 1.0* 4623 @ 2.7*
3954 @ 4.0
751 @ 0.450* 658 @ 1.23*
569 @ 1.8
1.5 gpm 2.5 gpm
5.7 Lpm 9.5 Lpm
2060s with
Overdrive
20.5 gpm
77.6 Lpm
30 gpm
113.5 Lpm
0.7
19.8
12,481 @ 2.7*
15,817 @ 4.0
809 @ 1.23*
1025 @ 1.8
4623 @ 2.7*
3954 @ 4.0
658 @ 1.29*
569 @ 1.8
2.5 gpm
9.5 Lpm