Samsung SPH-m300 User Manual page 48

M300 VMC Guide.book Page 40 Thursday, August 30, 2007 3:47 PM
6. Wait for the beep, and then repeat the digits using a normal tone of
voice. (The phone plays back your recording and asks you if the
recording sounds "OK.")
•
If the recording sounds OK (no mistakes and no background noises),
say Yes.
•
If you need to re-record the digits to fix any problems, say No. (The
phone then prompts you to say the digits again.)
7. After confirming that the recording sounds OK, repeat the recording
process with the next set of digits. In total, there are 10 sets of
numbers. When you are finished with a full session, you will reach a
screen that reads, "Adaptation Complete."
Note: It is recommended that you perform the complete adaptation of Voice Dial at
least once to achieve the maximum benefit of this feature. If a partial
adaptation is performed, you can always return later and resume the process
from the half way point.
Resetting Voice Dial Adaptation
To erase any adaptation and reset Voice Dial to its original state:
1. Press for Menu, followed by
MENU
OK
2. Press for Voice Service.
3
DEF
3. Press for Digit Dialing.
1
4. Press
2
5. Press the left softkey
Changing Voice Dial Sensitivity
You can adjust your phone's sensitivity to sounds when listening for voice
commands or names, making it require a more or less exact sound match before
responding to your command.
To adjust your phone's voice dial sensitivity:
1. Press for Menu, followed by
MENU
OK
2. Press for Voice Service.
3
DEF
3. Press
2
4. Press for Commands or
1
40 Voice Kit
9
WXYZ
for Reset Digits.
for OK.
9
WXYZ
for Sensitivity.
for Names.
2
for Settings.
for Settings.