Fortiexplorer - Fortinet FortiWiFi 60CM-3G4G Quick Start Manual

3. FortiExplorer

FortiExplorer provides a user-friendly tool that you can use to configure
a FortiWiFi unit over a standard USB connection, rather than using a
console cable or Ethernet connection.
Caution: Do not connect the USB cable until after FortiExplorer
has been installed.
USB A cable end into
Management Computer
Note: When using FortiExplorer for the first time, ensure the FortiWiFi
unit is using its factory default settings.
Installing FortiExplorer
FortiExplorer is available for Microsoft Windows XP, Vista, and 7. It is
also available for Mac OS 10.6 and higher.
Microsoft Windows Install
1. Extract the ZIP file (if downloaded) and double-click the .msi, or .exe
file and follow the instructions on-screen.
2. Connect the USB cable to the FortiWiFi unit and then to the
management computer.
3. The FortiExplorer Easy Configuration Utility opens when the USB
cable is connected. Select Install the hardware automatically and
select Next.
4. After a moment, FortiExplorer will launch.
WiFi
USB A to
DC+12V
USB B Cable
CONSOLE
USB MGMT USB DMZ WAN2 WAN1
USB B cable end into
FortiWiFi Unit
5 4 3 2 1
WiFi
MODEM