On/Off Button Operation; Operation With On/Off Button; Operation Setting; About The Operation Setting - Fujitsu UTY-DMMYM Operating Manual

5. ON/OFF BUTTON OPERATION

1
1

5-1. Operation with On/Off button

The operation starts when the [On/Off button] is pressed
1
once while all indoor units are stopped.
Notice
[On/Off button] can be operated while "Monitor screen"
is displayed. Refer to [4. MONITOR SCREEN].
Note
·
By this operation, the indoor units start operating
with the setting (operation mode, fan speed and
temperature) when last operation stopped.
·
Refer to [6. OPERATION SETTING] if operating
selected indoor units, switching the operating mode,
or setting the fan speed and temperature.
When the [On/Off button] is pressed once while operat-
2
ing, all the operating indoor units stop.
Note
When the 10 °C heat (All) function is selected, all indoor
units start the 10 °C heat operation. This is convenient
when going out.
Refer to [7. FUNCTION SETTING] for 10 °C heat (All).
On/Off button

6. OPERATION SETTING

1
1

6-1. About the Operation setting

These can vary the operation or operation settings. Available
settings or operations are as follows.
On/Off operation
On/Off for all indoor units or a selected indoor unit
can be set.
After selecting the operating indoor units, follow the
instructions in [6-3-1. On/Off operation].
Operation mode setting
Operating mode for all indoor units or a selected
indoor unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-2. Operation mode setting].
Room temperature setting
Temperature for all indoor units or a selected indoor
unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-3. Room temperature setting].
Fan speed setting
Fan speed of each selected indoor unit can be set.
After selecting the setting indoor units, follow the
instructions in [6-3-4. Fan speed setting].
10 °C heat setting
1 0 ° C h e a t o p e r a t i o n o f e a c h s e l e c t e d i n d o o r
unit can be set.
After selecting the setting indoor unit, follow the
instructions in [6-3-5. 10 °C heat setting].
I f s e t t i n g 1 0 ° C h e a t o p e r a t i o n f o r a l l i n d o o r
units, refer to [7. FUNCTION SETTING].
Economy setting
Economy setting of each selected indoor unit can
be set.
After selecting the setting indoor units, follow the
instructions in [6-3-6. Economy setting].
When economy operation is set for all indoor units,
follow the instructions in [7. FUNCTION SETTING].
En-10