Pioneer XV-DV333 Service Manual page 73

5
6. DSP error message mode
[ How to enter DSP error message mode]
• Press "DISPLAY" button of the accessory remote control(*) in service test mode, to select the mode that DSP error message are displayed.
[ How to quit DSP error message mode]
• Press "DISPLAY" button of the accessory remote control(*) again to select normal service test mode.
For this reason, the usual function of "display" is not effective during Service Test mode.
• DVD total running time/remaining time display is inactive.
• OSD changing on TV is also inactive.
Specification of DSP error display
The name of the error is
displayed in Four characters.
‡ ‡ ‡ ‡
FL
*1 : The "U", "M" and "9" are not displayed synchronizing with the display "ERR_0" - "ERR_4" ("DIRERR",etc),
Example of DSP error display
[Error] [8-char FL display]
1 2 3 4 5 6 7 8
ERR. 0 D I E R - U M
ERR. 1 D S E R - U M
ERR. 2 H R E Q - U M
ERR. 3 D S N G
ERR. 4 D M U T -
NO ERR D S O K
(Source is 88.2/96kHz.)
NO ERR D S O K
(Source is not 88.2/96kHz.)
Refer to "7.1.10 DSP TROUBLE SHOOTING".
Service Test mode connecting point
F
CONTROL ASSY
SIDE B
5
6
(*) : The alternative control is "DISPLAY" button of the accessory remote control of
Pioneer Home Theater System or "SYSTEM DISPLAY" button of Pioneer
mini Component System.
Space
DIR UNLOCK (This character is displayed while DIR is UNLOCK.)
DSP MUTE (This character is displayed while DSPMUTE is active.)
96k (This character is displayed while the source is 88.2 or 96kHz PCM.)
- U M 9
*1
but it depends on the state each time.
The following example display of "ERR_0" - "ERR_4" is just a sample.
- U M
M
- 9
-
SIDE B
6
7
Connecting point
TEST
XV-DV333
7
8
A
B
C
D
E
F
73
8