Loading And Ejecting Discs - Chevrolet Equinox 2015 Owner's Manual

of the music that has been
recorded, or the way the disc has
been handled.
There can be increased skipping,
difficulty in recording tracks,
difficulty in finding tracks, and/or
difficulty in loading and ejecting.
If these problems occur, check the
disc for damage or try a known
good disc.
To avoid damage to the CD player:
Do not use scratched or
damaged discs.
Do not apply labels to discs. The
labels could get caught in the
player.
Insert only one disc at a time.
Keep the loading slot free of
foreign materials, liquids, and
debris.
Use a marking pen to label the
top of the disc.

Loading and Ejecting Discs

To load a disc:
1. Turn the vehicle on.
2. Insert a disc into the slot, label
side up. The player pulls it in the
rest of the way. If the disc is
damaged or improperly loaded,
there is an error and the disc
ejects.
The disc automatically plays once
loaded.
Press to eject a disc from the
CD player. If the disc is not removed
within a short period of time, it is
automatically pulled back into the
player.
Control Buttons
The buttons used to control the CD
player are:
CD: Press to choose between the
CD and AUX player.
SEEK or SEEK: Press to
select tracks or to fast forward or
rewind within a track.
Infotainment System
INFO: Press to display additional
information about the CD that may
be available.
MENU/SEL: Turn to select tracks.
(Eject): Press to remove
the CD.
: Press to pause a CD or MP3
track; press again to resume
playback.
Playing an Audio CD
Press the CD button. If there is a
disc in the player it begins playing.
Information about the disc and
current track is shown on the
display depending on the data
stored.
Selecting a CD Track
Using the control buttons:
Press SEEK or
select the previous or next track.
Turn the MENU/SEL knob.
Using the CD Menu:
1. Press the MENU/SEL knob.
7-13
SEEK to