Important For Laser Products - JVC KD-AHD39 Instructions Manual

Thank you for purchasing aJVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.}
This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in aparticular installation. Ifthis equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Changes or modifications not approved by JVC could void the user's authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1Mlaser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION AVIS~ VARNING
U
CAUTION
VISIBLE AND/OR RAVONNEMENT LASER RADIACION LASER SYNUG OCH/EULER
::fl(tiil
VISIBLE AND
I
OR
INVISIBLE CLASS 1M VISIBLE ET
I
OU DE CL.ASE 1M OSYNLIG
At.lIft:I1HI
INVISIBLE CLASS
n
LASER RADIATION INVISIBL£ DE CLASSE VISIll.E v/O INXISIBLE LASERSTRAlNING.
1)~';1.1M
LASER RADIATION
WHEN OPEN. DO NOT 1M UNE FOIS OUVERT. CUANDO EST KLASS 1II,
NAIl
DENNA
v-1-UiJC
WHEN OPEN.
VIEW D1RECTLV WITH NE PAS REGARDER ABIERTO. NO MIRAR DEL
All
OPPNAD. lllU. DO NOT STARE
OPTICAL INSTRUMENTS. DIRECTEMENT AVEC DIRECTAMENTE BETRAKTA EJ
~".~I'
INTO BEAM.
IEC60825-1:2001 DES INSTRUMENTS ~STRUMENTAL STlW.£N MED OPTISKA
IflL\~( t:~L\.
FDA 21 CFR (ENG)
(ENG) OPTIQUES. (FAA) • (ESP) INSTRUMENT.
(sWEl
(JPNl LV«603'OO3A
[European Union only]
-
-
• How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages
19
and 20).
• How to forcibly eject adisc
ATT
+
• Ifthis does not work, resetyour unit.
• Be carefulnot to drop the disc when it ejects.
Thank you for purchasing aJVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.}
This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in aparticular installation. Ifthis equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Changes or modifications not approved by JVC could void the user's authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1Mlaser radiation when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION AVIS~ VARNING
U
CAUTION
VISIBLE AND/OR RAVONNEMENT LASER RADIACION LASER SYNUG OCH/EULER
::fl(tiil
VISIBLE AND
I
OR
INVISIBLE CLASS 1M VISIBLE ET
I
OU DE CL.ASE 1M OSYNLIG
At.lIft:I1HI
INVISIBLE CLASS
n
LASER RADIATION INVISIBL£ DE CLASSE VISIll.E v/O INXISIBLE LASERSTRAlNING.
1)~';1.1M
LASER RADIATION
WHEN OPEN. DO NOT 1M UNE FOIS OUVERT. CUANDO EST KLASS 1II,
NAIl
DENNA
v-1-UiJC
WHEN OPEN.
VIEW D1RECTLV WITH NE PAS REGARDER ABIERTO. NO MIRAR DEL
All
OPPNAD. lllU. DO NOT STARE
OPTICAL INSTRUMENTS. DIRECTEMENT AVEC DIRECTAMENTE BETRAKTA EJ
~".~I'
INTO BEAM.
IEC60825-1:2001 DES INSTRUMENTS ~STRUMENTAL STlW.£N MED OPTISKA
IflL\~( t:~L\.
FDA 21 CFR (ENG)
(ENG) OPTIQUES. (FAA) • (ESP) INSTRUMENT.
(sWEl
(JPNl LV«603'OO3A
[European Union only]
-
-
• How to reset your unit
• Your preset adjustments will also be erased (except the
registered Bluetooth device, see pages
19
and 20).
• How to forcibly eject adisc
ATT
+
• Ifthis does not work, resetyour unit.
• Be carefulnot to drop the disc when it ejects.