CDX-M730
2-5. MOTOR BLOCK ASSY, CAM (R) ASSY
Note : Install the motor block assy and cam (R) assy in this roder.
For phase alignment between cams (L) and (R), see page 19 and 21.
5 motor block assy
3 CN902
2-6. MAIN BOARD
3 PTT 2.6x6
14
4 PTT 2.6x6
5 MAIN board
ground point
1 PTT 2.6x6
Note: Install the cam (R) assy with
A
2 cam (R) assy
4 PTT 2.6x6
ground point
1 PTT 2.6x6
the cam fully rotated in the
direction of the arrow A .
2 PTT 2.6x6