Using Dsp Modes - JVC RX-5030VBK Instructions Manual

Creating Realistic Sound Fields

Using DSP Modes

Speaker layouts required for the DSP modes are as follows:
• 5 channels
(Front, center, and surround speakers
are connected.)
• 4 channels
(Front and surround speakers are
connected.)
7 Operating procedure
1
Start playing 2 channel software—either
analog or Linear PCM—and select the
source.
2
Press DSP.
The last selected DSP mode will be activated and the DSP
indicator lights up on the display.
• Each time you press the button, the DSP mode changes
as follows:
LIVE CLUB
ALL CH STEREO
(All Channel Stereo)
Note:
For the available DSP modes according to input signals, see
"Available Surround/DSP modes for each input signal" on page
23.
To adjust the speaker output level and the effect level for
DAP mode, see pages 17 to 19.
The adjustment is memorized for each source (except for the
effect level).
To turn off DSP mode, press SURROUND/DSP OFF.
Signal and speaker indicators on the display
Signal indicators
The following signal indicators light up—:
L: • When digital input is selected: Lights up when the left
channel signal comes in.
• When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the
right channel signal comes in.
• When analog input is selected: Always lights up.
C: When the center channel signal comes in.
25
DANCE CLUB HALL
PAVILION
Speaker indicators
7 Adjustable items and selected Surround/DSP mode
• For adjustment operation, see pages 17 to 19.
Selected Surround/ Adjustable items
DSP mode
SURROUND OFF FRONT L LEVEL
(stereo) FRONT R LEVEL
SUBWFR LEVEL
DOLBY DIGITAL, FRONT L LEVEL
DTS SURROUND, FRONT R LEVEL
PLII MOVIE CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
PLII MUSIC FRONT L LEVEL
FRONT R LEVEL
CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
PANORAMA CTRL
LIVE CLUB, FRONT L LEVEL
DANCE CLUB, FRONT R LEVEL
HALL, SURR L LEVEL
PAVILION SURR R LEVEL
SUBWFR LEVEL
EFFECT
ALL CH STEREO FRONT L LEVEL
(All Channel Stereo) FRONT R LEVEL
CENTER LEVEL
SURR L LEVEL
SURR R LEVEL
SUBWFR LEVEL
Notes:
• Regardless of the selected Surround/DSP mode,
– You cannot adjust the center speaker output level when the center
speaker size is set to "NONE" (see page 13).
– You cannot adjust the surround speaker output levels when the
surround speaker size is set to "NONE" (see page 13).
• You cannot adjust the subwoofer output level when "SUBWOOFER
NO" is selected for the subwoofer setting (see page 13).
LS: When the left surround channel signal comes in.
RS: When the right surround channel signal comes in.
S: When the monaural surround channel signal comes in.
LFE: When the LFE channel signal comes in.
The speaker indicators light up when the corresponding
speaker is connected and activated.
Note:
When "SUBWOOFER YES" is selected for the subwoofer setting
(see page 13) and the subwoofer output is turned on (see page 16),
lights up.
S.WFR
Adjustable
range
–10 to +10
–10 to +10
–10 to +10
ON " OFF
–10 to +10
1 to 5
–10 to +10