Sharp Aquos LC-40LE540E Operation Manual page 25

Basic adjustment
Searching for satellite broadcasts
(Only for LE542 model series)
●
SADTV Auto tuning
Allows you to tune satellite services.
1 Press MENU on the remote control. With ◄/► keys
select Channel, then select Auto Tuning and press
OK.
2 With ▲/▼/◄/► keys select Tuner type → SADTV.
3 Go to Start Search and press OK.
The following screen will appear:
Choose the setup applicable to your satellite device and
confirm your choice pressing OK button on the remote
control.
The automatic search will start.
●
SADTV manual Tuning
This option allows you add satellite services manually.
Press MENU on the remote control. With ▼ key select
SADTV manual Tuning and press OK.
●
Input Satellite
Choose the setting applicable to your satellite
device and press OK.
●
Frequency (MHz)
Introduce the transponder frequency in MHz.
●
Symbol rate
Introduce the symbol rate.
●
Polarization
Allows to choose between horizontal or vertical
polarization.
Select Start Search and press OK to start searching.
●
Satellite edit
This option allows you to adjust manually the satellite
properties.
Press ▼ to select "Satellite Edit" and then press OK.
Select Satellite Set. You can choose between the
following options:
Consult your dealers before using a method other than
Single Satellite.
1 Select Single Satellite and then press OK.
2 Press ▼ to select "Satellite 1" and press OK.
3 Select Satellite Name and press OK. Enter the
satellite name using software keyboard.
4 Select LNB Type and choose between Universal
or User. If you choose Universal the other settings
remains disabled (grey). If you choose "User" the
following settings will be enabled:
●
Low LO freq.
Allows you to change default low frequency.
●
High LO freq.
Allows you to change default high frecuency.
●
Polarization
Depending on the broadcaster characteristics choose
between Vertical&Horizontal (search for in both
polarities), Vertical or Horizontal (search for in one
polarity) or LNB OFF (LNB power off).
●
22K settings
Select ON to add the high band to the search
automatically process by applying 22KHz tone.
Press ▼ to select Save and then press OK to save the
settings.
23