Specifications - JVC LVT1140-004A Instructions Manual

Specifications

Amplifier
Output Power
At Stereo operation
Front channels: 100 W*
8 Ω, at 1 kHz with no more than 0.8% total
harmonic distortion (IEC268-3/DIN).
At Surround operation
Front channels: 100 W per channel, min. RMS, driven into
8 Ω, at 1 kHz with no more than 0.8% total
harmonic distortion.
100 W, min. RMS, driven into 8 Ω, at 1 kHz
Center channel:
with no more than 0.8% total harmonic
distortion.
Surround channels: 100 W per channel, min. RMS, driven into
8 Ω, at 1 kHz with no more than 0.8% total
harmonic distortion.
1
(* Measured on AC 110 V, 127 V, 220 V, and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
2
Audio Input (DIGITAL IN)*
Coaxial DIGITAL 1 (DVD):
Optical RX-6042S
DIGITAL 2 (CD), DIGITAL 3 (TV):
–21 dBm to –15 dBm (660 nm ±30 nm)
RX-5042S
DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
2
* Corresponding to Linear PCM, Dolby Digital, and DTS
Digital Surround (with sampling frequency—32 kHz,
44.1 kHz, 48 kHz)
Recording Output Level
TAPE/CDR, VCR:
Signal-to-Noise Ratio ('66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Frequency Response (8 Ω)
CD, TAPE/CDR, VCR, TV SOUND, DVD:
Bass Boost—Only for RX-6042S:
Equalization (5 bands)
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz:
Main differences between the models
Models Output/Input terminals
COMPONENT
(IN/OUT)
‡
RX-6042S
×
RX-5042S
• The remote control supplied with RX-6042S can operate other manufacture's video equipment, but the one with RX-5042S cannot.
38
1
per channel, min. RMS, driven into
220 mV/47 kΩ
0.5 V(p-p)/75 Ω
220 mV
87 dB/62 dB
20 Hz to 50 kHz (+1 dB, –3 dB)
+3 dB ±1 dB at 100 Hz
±8 dB (in 2 dB steps)
S-VIDEO Analog discrete
(IN/OUT) (DVD MULTI)
‡ ‡
× ×
Designs and specifications are subject to change without notice.
Video
Video Input Sensitivity/Impedance
Composite video
DVD, VCR:
S-video—Only for RX-6042S
DVD, VCR
(Y: luminance):
(C: chrominance, burst):
Component—Only for RX-6042S
DVD, VCR
(Y: luminance):
(P , P ):
B R
Video Output Level
Composite video
VCR, MONITOR OUT:
S-video—Only for RX-6042S
VCR, MONITOR OUT
(Y: luminance):
(C: chrominance, burst):
Component—Only for RX-6042S
MONITOR OUT
(Y: luminance):
(P , P ):
B R
Synchronization:
Signal-to-Noise Ratio:
FM tuner (IHF)
Tuning Range:
Usable Sensitivity
50 dB Quieting Sensitivity
Stereo Separation at OUT (REC):
AM tuner
Tuning Range: 531 kHz to 1 602 kHz (at 9 kHz intervals)
530 kHz to 1 600 kHz (at 10 kHz intervals)
General
Power Requirements: AC 110 V/127 V/220 V/230 V – 240 V
adjustable with the voltage selector,
50 Hz/60 Hz
Power Consumption
For RX-6042S:
For RX-5042S:
Dimensions (W x H x D)
For RX-6042S:
For RX-5042S:
Mass
For RX-6042S:
For RX-5042S:
Sources
DVD MULTI Bass Boost
‡ ‡
× ×
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
Negative
45 dB
87.50 MHz to 108.00 MHz
12.8 dBf (1.2 µV/75 Ω)
Monaural:
16.0 dBf (1.7 µV/75 Ω)
Monaural:
37.5 dBf (20.5 µV/75 Ω)
Stereo:
35 dB at 1 kHz
200 W (at operation)
2 W (in standby mode)
210 W (at operation)
4.5 W (in standby mode)
435 mm x 146.5 mm x 409.5 mm
435 mm x 146.5 mm x 369.5 mm
9.8 kg
8.0 kg
‡: Equipped ×: Not equipped
Functions
Center Tone AV Compulink
‡
AV COMPULINK-III
×
AV COMPULINK
,