Iad(8)-U10 Etu And Ip Phone Both Behind Nat Or; Supported - NEC Electra Elite IPK Installation And Maintenance Manual

Etu with megaco station package
Hide thumbs Also See for Electra Elite IPK:
Table of Contents

Advertisement

Document Revision 4
___________________________________________________________________________________
S
5
IAD(8)-U10 ETU
ECTION
P
ORT
When the IAD is behind one Firewall or NAT Router, and the phone is behind another
Firewall or NAT Router, there is no way to configure the two devices so that they will
communicate properly.
This is true when each device is on a private network and neither can send packets to
the other through the Firewall/NAT routers.
In this example, the telephone cannot send packets to the IAD card using the card's
192.168.1.2 address, and the card cannot send packets to the telephone using the
telephone's 10.0.0.109 address.
Even if both routers are configured to forward the UDP packets for call control and
voice, this topology cannot be accommodated. Instead, give the IAD card a public
address and set the firewall on the IAD side of the network to treat it as a public
network server. This will allow you to follow the instructions under "IP Phone Behind
a NAT Router" to set up the network.
___________________________________________________________________________________
C - 6
IP P
AND
-F
F
ORWARDING
IREWALLS
Firewall Router
Public Network Side
143.119.8.143
Firewall Router
Private Network Side
10.0.0.1
IP Telephone
10.0.0.109
B
HONE BOTH
EHIND
- T
A
HIS
PPLICATION IS NOT
WAN
Firewall Router
Public Network Side
201.116.4.114
Firewall Router
Private Network Side
192.168.1.1
IP Megaco Station Enhancements
MEGACO Station
NAT
OR
S
UPPORTED
Electra Elite IPK with
IAD Megaco Station
Card
192.168.1.2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electra elite ipk iad(8)-u series

Table of Contents