Duplex Option Bottom Cover And Entry Sensor Card Removal - IBM 3112 Service Manual

Duplex Option Bottom Cover
And Entry Sensor Card Removal
1. Remove the duplexer top cover.
2. Remove the exit card cover and exit card.
3. Pry off the cover for the blind connector.
4. Pry up on the blind connector to remove it from the bottom cover.
5. Release the two latches [A] on the frame assembly and lift it out
of the bottom cover.
Note: When re-installing the sensor lift up the flags so they will clear
the sensor and not be damaged.
Repair Information
99