Samsung HLT6187SX Service Manual page 126

12-1-8 Separation of the Cover dust
Part Name
Cover dust ① Cover dust.
① Disassemble 1EA SCREW for assembling
COVER-REAR and COVER-DUST.
② Push the picture directions and separate SNAP of C/DUST
from C/REAR.
(Pushing area : Top or bottom of Screw jointing part )
③ Disassemble C/DUST using gap which occurred as SANP of
C/DUST is separated,
Samsung Electronics
Description
Disassembly & Reassembly
Description Photo
12-17