General - Sony STR-DE575 Service Manual

1
/
SPEAKERS
PHONES
qf
1 ?/1 switch
Press to turn the receiver on and off.
2 DISPLAY button
Press repeatedly to change the information on the
display window as follows:
m
Index name of the component or the preset station*
m
FUNCTION button indication or frequency**
m
Sound field applied to the program source
* Index name appears only when you have assigned one to the
component or preset station (see page 41). Index name does not
appear when only blank spaces have been entered, or it is the
same as the function button.
** Frequency appears only when the tuner is selected.
3 DIMMER button
Press repeatedly to adjust the brightness of the
display. When you want to turn off the display, set in
the "DIM.RANGE" parameter in the SET UP menu
(page 45).
The following buttons operate the built-in tuner. For
4
details, see "Receiving Broadcasts" starting from page 38.
PRESET TUNING +/– buttons
Scan all preset stations.
TUNING +/- buttons
Scan all the available radio stations.
MEMORY button
Press to memorize a preset station.
SHIFT button
Selects a memory page for preset stations.
FM MODE button
If "STEREO" flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
FM button
Selects the FM band.
AM button
Selects the AM band.
5 MULTI CHANNEL DECODING indicator
This indicator lights up when the unit is decoding
signals recorded in a multi channel format.
6 Use the CINEMA STUDIO EX buttons to enjoy the
CINEMA STUDIO EX sound effects.
A/B/C buttons
Press to activate the CINEMA STUDIO EX A, B or C
sound field (page 29).
SECTION 1
2 3 4
DISPLAY
PRESET
– TUNING + – TUNING +
DIMMER
MEMORY SHIFT FM MODE FM AM
7 Use the SOUND FIELD buttons to enjoy surround
sound. For details, see "Enjoying Surround Sound"
starting from page 27.
A.F.D. button / indicator
Press to set the receiver to automatically detect the
type of audio signal being input and perform proper
decoding (if necessary).
MODE button / indicator
Press to activate the sound field selection mode (page 28).
2CH button / indicator
Press to output sound from only the front (left and
right) speakers.
8 INPUT MODE button
Press to select the input mode for your digital
components (DVD/LD, TV/SAT).
Each press switches the input mode of the currently
selected component.
Select
AUTO
DIGITAL (OPTICAL)
DIGITAL (COAXIAL)
ANALOG
Note
If 96 kHz digital signal is input, the tone, sound field and
surround parameters do not function.
9 Function buttons
Press one of the buttons to select the component you
want to use.
To select
VCR
DVD or LD player
TV or satellite tuner
MD or Tape deck
CD player
Built in tuner
An audio component
After selecting the component, turn on the component
you selected and play the program source.
• After selecting VCR, DVD player, or LD player, turn on the
TV and set the TV's video input to match the component
you selected.

GENERAL

5 6 7
MULTI CHANNEL DECODING
LEVEL
SURR
SET UP
CINEMA STUDIO EX
EQ NAME
A B C
SOUND FIELD
A.F.D. MODE 2CH
ENTER
qd
To
Give priority to digital signals
when there are both digital and
analog connections. If there are no
digital signals, analog is selected
Specify the digital audio signals
input to the DIGITAL OPTICAL
input jacks
Specify the digital audio signals
input to the DIGITAL COAXIAL
input jacks (DVD/LD only)
Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks
Press
VIDEO
DVD/LD
TV/SAT
MD/TAPE
CD
TUNER
AUX
STR-DE575/K502/K502P
This section is extracted
from instruction manual.
8 9
VIDEO 1 VIDEO 2 DVD/LD TV/SAT
MD/TAPE CD TUNER AUX
INPUT MODE
MASTER VOLUME
+
–
EQUALIZER
MULTI CH IN
MUTING
qs qa 0
0 MASTER VOLUME control
After turning on the component you selected, rotate to
adjust the volume.
qa MUTING button
Press to mute the sound. MUTING appears in the
display when the sound is muted.
qs EQUALIZER button
Press to turn the equalizer on or off. The EQ indicator
in the display lights when the equalizer is turned on.
When you adjust the equalizer using the EQ
parameters (page 36) the settings are stored
automatically and can be reproduced wherever you
turn on the equalizer.
• The equalizer is not compatible with 96 kHz digital audio
signals and during MULTI CH IN input.
z When you want to listen to an analog source
without any digital processing
Do the following to bypass the sound field and equalizer
circuits.
1 Press 2CH.
2 Press EQ to turn off the EQ indicator.
The result will be a sound that is highly faithful to the
program source.
qd MULTI CH IN button
Press to enjoy the audio source connected to the
MULTI CH IN jacks with the video from the selected
component. Press again to cancel MULTI CH IN.
• When the MULTI CH IN is selected, the tone, equalizer,
and sound field effects do not function.
qf SPEAKERS button
Press SPEAKERS button to ON.
PHONES jack
Connects headphones.
• When you connect the headphones, no sound will come
from the speakers.
5