Kyocera ECOSYS M2530dn Operation Manual page 34

Selecting the Resolution
FAX Resolution:
1 *200x100dpi Norm.
*********************
2 200x200dpi Fine
3
200x400dpi S.Fin
5
Select the resolution suitable for sending originals.
•200 × 100 dpi (Normal): when sending originals with
standard size characters
Typical character size: 10.5 point (example:
Resolution Resolution
•200 × 200 dpi (Fine): when sending originals with
relatively small characters and thin lines
Typical character size: 8 point (example:
Resolution
•200 × 400 dpi (Super Fine): when sending originals
with minute characters and lines
Typical character size: 6 point (example:
Resolution
•400 × 400 dpi (Ultra Fine): when sending originals with
minute characters and lines more finely
Typical character size: 6 point (example:
Resolution
NOTE:
The default setting is 200 × 100 dpi (Normal).
The higher the resolution, the clearer the image. However,
higher resolution also means longer send times.
The machine does not support resolution of 300 × 300 dpi
when sending faxes. If you have selected 300 × 300 dpi, the
machine sends faxes after lowering the resolution to 200 ×
200 dpi (Fine).
For Multi Sending, the scan resolution should be equal to or
higher than the fax resolution. If the selected resolutions are
not in this condition, the machine automatically adjusts the
resolution and changes the selection.
1 Press the Function Menu key.
2 Press the  or  key to select [FAX Resolution].
3 Press the OK key.
4 Press the  or  key to select the desired
a b
resolution.
5 Press the OK key.
3-6
)
)
)
)
FAX Operation (Basic)
Resolution
Resolution
Resolution