-
When Double (
,
=)
mode has been set in PIP, the Picture Size cannot be set.
-
Temporary image retention may occur when viewing a static image on the set for more than two hours.
-
After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the'" or
~
button to select "Position", then press the ENTER G'
button Press the'" or T button to move the picture up and down.
Reset: Press the'" or
~
button to select "Reset", then press the
ENTER G' button. You can initialize the setting.
-
After selecting "Just Scan" in HOMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the'" or
~
button to select "Position", then press the ENTER G'
button. Press the"', T, ... or
~
button to move the picture.
Reset: Press the'" or
~
button to select "Reset", then press the
ENTER G' button. You can initialize the setting.
::-- HD (High Definition)
16:9 - 1080il1080p (1920x1080), 720p (1280x720)
-
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
ATV, AV, S-Video, Component (480i, 480p)
DTV(1080i), Component (1080L 1080p), HOM
I
(720p, 1080i, 1080P)
PC
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9,4:3, Wide Fit, Just Scan
16:9,4:3
16:9
Sets the picture to 16:9 wide mode.
loom1
Magnifies the size of the picture on
the screen.
loom2
Magnifies the size of the picture more
than
"loom1".
Wide Fit
Enlarges the aspect ratio of the
picture to fit the entire screen.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1
080i/1
080p), Component
(1080i/1080p) or DTV (1080i) signals
are input.