Auto Wall-Mount Adjustment (Sold Separately) - Samsung 850 User Manual

Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
Auto Wall-Mount
TV Rear Panel
EX-LINK Cable
(Not supplied)
V-Chip
"
Caption
en
@,
~
External Settings
->
Entertainment : Off
Energy Saving
: Off
' 7
Software Upgrade
Remembering the Position
2.
Adjust to the desired position using the .. ,
~
,
<OIl,
~
buttons.
~
If you press an arrow button when no OSO is displayed on the TV screen,
the Adjustment screen appears.
> Press the INFO button to reset. Press the
<OIl
or
~
button to select "Yes",
then press the ENTER
G'
button. The position is initialized to the default
setting.
3. Press the Blue button.
Press the .. and
~
buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
>
To not save the current position, press the RETURN button.
> When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER
G'
button to save.
> When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5. Press the ENTER
G'
button.
> The saved Position appears on the left side of the OSO.
Moving to the remembered position
1.
Complete Step 1 of "Entering the menu".
2.
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
>
You can move the wall mount to one of the 3 pre-set positions by pressing
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
> If you adjust the position after moving to a pre-set position, the position display will disappear.
Entering the menu
1. Press the .. ,
~,
<OIl
or
~
button on your remote control.
> The Wall Mount Adjustment screen is displayed.
>
If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the .. or ~ button to select
"Setup", then press the ENTER G' button.
• Press the .. or
~
button to select "External Settings", then press the ENTER
G'
button.
• Press the .. or
~
button to select "Wall-Mount Adjustment", then press the
ENTER
G'
button.
>-
For installation, refer to the Installation Manual provided with the wall mount.
>-
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
:;". This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
:;". The auto wall mount will not work when Anynet+ or WISELINK Pro is operating.
> LN46A850S 1F and LN46A860S2F models are not compatible with the old electrically powered wall mount model
(WMN5090A).