Table of Contents
Advertisement
No. Page
Item
13 CAM
FAN CONTROL
CONFIG 2
14 PRESET
COLOR TEMP <P>
WHITE
C TEMP BAL <P>
R GAIN <P>
B GAIN <P>
AWB ENABLE <P>
15 DCC ADJUST DCC FUNCTION SEL DCC/FIX
DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME
DCC PEAK FILTER
Settings
Description
AUTO/MANU/
Specifies the fan control method.
OFF
AUTO: Normal fan control
OFF: Forcibly stop the fan.
MANU: Forcibly stop the fan while the unit
is recording.
Note
Temperatures rise within the unit when the fan is
forcibly stopped, so it should not be stopped for
extended periods. Forcible stopping of the fan is
cancelled if temperatures rise to abnormal levels
within the unit. If the unit is powered off while
this item is set to MANU or OFF, the setting is
changed to AUTO when the unit is powered on
again.
Display reference
Sets the white balance preset value.
color
temperature.
(–99 to 99)
Finer setting when the desired color could not
be obtained with the COLOR TEMP <P>
color temperature setting.
(–99 to 99)
Sets the R gain preset value.
(–99 to 99)
Sets the B gain preset value.
OFF/ON
When the WHITE BAL switch is set to PRST,
turns the function that enables execution of
AWB (auto white balance) on and off.
Enables or disables automatic knee point
adjustment when the OUTPUT/DCC switch
is set to CAM, DCC: ON.
DCC: Automatically adjust the knee point
according to the luminance of the
subject.
FIX: Set the knee point to a fixed value.
400%/450%/
Sets the dynamic range when the OUTPUT/
500%/550%/
DCC switch is set to CAM, DCC: ON.
600%
(–99 to 99)
Adjusts the DCC minimum knee point.
(–99 to 99)
Adjusts the gain to DCC detected value.
(–99 to 99)
Adjusts the DCC reaction speed.
0 to 15
Adjusts the response sensitivity to the peak of
the DCC detected value.
Menu List
109
Advertisement
Table of Contents
