Maintenance Mode Workflow - Kyocera FS-C8600DN Service Manual

Item No.
U952

Maintenance mode workflow

Description
The maintenance modes configured in the machine or a USB flash device as a workflow must be
executed in succession.
Purpose
This allows maintenance mode to be preset as a template.
Setting
1. Press the OK key.
2. Select the item.
Continue
Exec(USB)
Exec
Entry(USB)
Entry
Log
Method: [Exec]
1. Select [Execute].
2. Select the workflow.
Data1 - 6
3. Press the OK key.
Executes maintenance modes defined in a workflow in succession.
Method: [Entry]
1. Select [Entry].
2. Select the area to store workflow.
Data1 - 6
3. Press the numeric keys to assign a maintenance Nbr. into a workflow.
Flow1 - 14
4. Press the OK key. The setting is set.
5. Press the OK key.
Executes maintenance modes defined in a workflow in succession.
Display
Restarting an abandoned workflow
Executes a workflow housed in a USB flash device
Executes a workflow stored in the machine
Exports a workflow housed in a USB flash device to the machine
Assigns a workflow in the machine manually
Displays a list of workflows recently executed
Display
The area to store workflows in the machine
Display
The area to store workflows in the machine
Display
Assign a maintenance Nbr.
Description
Description
Description
Description
Description
1-3-146
2MN/2N1