Table of Contents
Advertisement
Available languages
Available languages
About Speaker Grille
The speaker grille is removable as illustrated below:
To remove the speaker grille, insert your fingers at the top of the speaker grille, then
pull towards you. Repeat the procedure at the bottom of the speaker grille.
To attach the speaker grille, put the projections of the speaker into the holes of the
speaker grille.
• Do not push the speaker grille strongly.
Specifications
Type:
Speakers
Mid and low range:
Tweeter:
Power handling capacity: 100 W
Impedance:
Crossover frequency:
Frequency range:
Sound pressure level:
Dimensions (W x H x D): 143 mm x 257 mm x 243 mm
Mass:
Supplied accessory:
Design and specifications subject to change without notice.
4
Projections
Holes
2-way bass-reflex type
Magnetically-shielded type
3
10.5 cm (4
/
in.) wooden cone
16
2.0 cm (
13
/
in.) wooden dome
16
6 Ω
3 500 Hz
55 Hz to 50 000 Hz
82 dB/W•m
11
1
(5
/
in. x 10
/
in. x 9
16
8
3.5 kg (7.81 lbs)
Speaker cord (3 m) (1)
Speaker grille
5
/
in.)
8
Advertisement
Table of Contents
