Displaying The Zone Control Screen - Kenwood DDX7015 Instruction Manual

Sound Effects Menu
~C?neC()f1trol
You can set the front and rear audio source.
90 English
[JJ Returns to the Control screen of the previous
source.
[2] Calls the Setup Menu. (see page 57)
W Calls the Sound Effects Menu.
m
Turns the Zone Function (that sets different source
sounds for front and rear speakers) On or Off.
When turned On, ~
and ~ are shown.
[5] Sets the front and rear audio source separately.
(This button appears when the Zone function is On.)
~
~
When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
However,if you have
set the "Area"
to "Reverse",
the audio source that is output at the AV OUTPUT
terminal is switched depending
on the front sound
source.
[6] Switches the front and rear audio sources.
(This button appears when the Zone function is On.l
Use "Reverse" to change over the front and rear
audio sources.
~
~
.
If the zone function is
turned on, the
W/(JD
button appears on each source control screen,
with which you can adjust the volume balance
between the front and rear sources.