Table of Contents
Advertisement
Message
Cause
Cannot remove scenes
This may occur when
scene that was edited for
division, etc. is to be
unload.
Cannot delete scenes
This may occur when
scene that was edited for
division, etc. is to be
deleted.
Please update disc
The thumbnail at the start
of program or play list may
not appear when disc
edited on device other
than this DVD video
camera/recorder is used,
or, when editing, such as
combining, is performed on
this DVD video camera/
recorder.
Disc id full
The number of entered
scenes has reached the
limit that can be entered,
so the control information
for generating thumbnails
cannot be added.
Reformat for camera
Has the disc been initial-
Continue?
ized on a PC?
Error on disc
Has initializing the disc on
All data will be deleted
a PC been interrupted?
Continue?
E1 - 10
Troubleshooting
Combine the divided scenes,
and then unload them.
Combine the divided scenes,
and then delete them.
If thumbnail is information is
insufficient, Disc Navigation
will automatically create
thumbnails after it starts.
Combine several scenes or
delete (unload) them.
Choose "Yes" and initialize the
disc when using it on this DVD
video camera/recorder.
Technical explanation
This appears if CELL is to be
divided (increased) when the
number of CELLs has reached
the limit of 999. (If recording
continues without editing on
this DVD video camera/
recorder, 1 scene will make up
1 EP or 1 CELL. If scenes are
combined, the number of EPs
will decrease, but the number
of CELLs will not decrease. If
CELL is to be divided at the
upper limit number of CELLs,
several scenes must be
deleted in this status without
traversing multiple CELLs. (*2)
Same as above.
This appears if a disc in which
EP is not attached to the
beginning of program or play
list is inserted (this occurs
when EP was not attached to
the beginning of program or
play list when editing was
performed on devices other
than this DVD video camera/
recorder, or scenes traversing
multiple programs were
combined, and thumbnails
cannot be displayed on Disc
Navigation screen). This
message appears when Disc
Navigation is started first after
power is supplied: Operation
following message instructions
will attach EP to the beginning
of program or play list, thereby
enabling thumbnails to be
displayed.
This appears if the number of
scenes has reached 999 when
control information is being
updated. (*1)
This appears if the disc has a
file that has been recorded in
a format that cannot be
detected by UDF2.0. (This
problem will be solved if the
disc is formatted on this DVD
video camera/recorder.)
This appears if the disc has
logically been destroyed. (The
problem frequently occurs
because of problem in the
UDF file system.) Although the
disc for which this message
appeared cannot be used as
is, it may be usable after it is
initialized (Note, however, that
all recorded data will be
deleted).
Faulty or
not
None
None
None.
However,
the disc
has a
problem in
compat-
ibility.
None
Error on
disc
Error on
disc
Advertisement
Table of Contents
