[8-15 Compressor Replacement Instructions ]
Discharge pipe
Compressor covers (left)
(The inside of the compressor
cover is lined with sound
insulation material.)
4
Remove the compressor cover (top, left, and right), the compressor wires.
When brazing the pipes, make sure that the acoustic insulation in the compressor cover
and the thermal insulation on the compressor's suction pilpe are not damaged.
5
Remove the fixing gasket, the gasket, the mounting plate, and the mounting
support metal. Then, replace the compressor after debrazing the discharge
pipe, the suction pipe, and the injection pipe.
HWE13080
Compressor covers (top)
(The inside of the compressor cover
is lined with sound insulation material.)
Injection port
Gasket
Terminal block box
Mounting plate
- 314 -
Suction piping
Compressor covers (right)
(The inside of the compressor
cover is lined with sound
insulation material.)
Fixing gasket
Mounting support metal
GB