Demand Control - Mitsubishi Electric PURY-HP72 Service Handbook

[5-2 Outdoor Unit Control ]
5-2-19

Demand Control

Cooling/heating operation can be prohibited (Thermo-OFF) by an external input to the indoor units.
When DIP SW6-8 is set to ON, the 4-step DEMAND control is enabled.
Eight-step demand control is possible in the system with two outdoor units.
For details, refer to the following page(s). [2-4-7 Various Control Methods Using the Signal Input/Output Connector on Outdoor
Unit](page 26)
HWE13080
- 138 -
GB