Replacing The Keyboard - Gateway P-79 Service Manual

Replacing the keyboard

v
78
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2.5×3 (Keyboard cover)
•
3 black M2.5x3 (Keyboard)
•
2 long black (Keyboard)
To replace the keyboard:
1
Complete the steps in
2
Remove the keyboard cover by following the steps in
cover" on page 75.
3
Remove the five keyboard screws.
Important
Note the location of the long screw.
Long screws
- OR -
"Preparing the notebook" on page
Scribe or non-marring tool
57.
"Replacing the keyboard