Battery Module Components; Battery Module Components, Top View; Battery Module Components - Top View - Teledyne 2105 Installation And Operation Manual

2105 Interface Module
Section 1 Introduction
1.3 Battery Module
Components
Figure 1-3 Battery Module Components, Top View
Table 1-3 Battery Module
Components - Top View
Item No. Name
1 Communication Connector Connects the modules in the stack, transfers power and data.
2 Connector Cap
(Stowed on Cap Holder)
3 Lantern Battery
(Alkaline shown)
4 Door
5 Battery Carrier
1-4
Figures 1-3 and 1-4 identify key components of the Battery
Module.
4
Description
Insert into the communication connector when not in use to protect the
connector from moisture damage. When the connector is in use, store the
connector cap on the cap holder.
6V alkaline or rechargeable lead-acid battery, quantity of 2.
Two circular doors contain the desiccant bags, hold the battery carriers in
place, and seal the module case.
Holds batteries in place and transfers power to the connectors.
1
2
3
5