Rear Panel - Pioneer C-AX10 Service Manual

Digital control amplifier
Hide thumbs Also See for C-AX10:
Table of Contents

Advertisement

C-AX10

7 REAR PANEL

1
2
1 Front output jacks (FRONT OUT)
These are the front channel output jacks.
In Normal mode, OUT 1 and OUT 2 have the same out-
put.
In Network mode, OUT 1 has high range (HIGH) output
and OUT 2 has low range (LOW) output.
2 Centre output jacks (CENTER OUT)
These are the centre channel output jacks during multi-
channel (six channel) output. Both 1 and 2 have the
same output.
3 Surround output jacks (SURROUND OUT)
These are the surround channel output jacks during
multichannel (six channel) output.
4 Subwoofer output jacks (SUB WOOFER OUT)
These are the subwoofer channel output jacks during
multichannel (six channel) output. Both 1 and 2 have
the same output.
5 Control input/output jacks (CONTROL IN, OUT)
These jacks are used for controlling multiple Pioneer
devices having the Î mark from the remote control
sensor of a single device.
6 Digital input jacks (PCM/2/DTS DIGITAL IN)
Jacks 1 to 3 are for coaxial cables (COAX) and jacks 4
to 6 are for fiber-optic cables (OPT).
In a PDIF connection, the PDIF jack, 1 COAX jack and
2 COAX jack are used. For details, see page 47.
7 Digital output jacks (PCM/2/DTS DIGITAL OUT)
These output jacks are for a coaxial cable (COAX) and
a fiber-optic cable (OPT).
118
3 4 5
6
8
9
0
7
-
=
8 Signal ground terminal (SIGNAL GND)
Use this terminal when using an analogue record
player or other device where a signal ground is re-
quired.
CAUTION
This terminal is provided to reduce noise. It is not a
safety ground.
9 ANALOG 3/PHONO input jacks
These jacks are used to select line input or phono in-
put. See page 45 for the selection method.
0 ANALOG 2 input/output jacks
These jacks are used for making analogue connec-
tions to recording or playback devices through the line
input/output jacks.
- ANALOG 1 input/output jacks
These jacks are used for making analogue connec-
tions to recording or playback devices through the line
input/output jacks.
= DVD multichannel input jacks (DVD MULTI CH IN)
These jacks are used to connect to a DVD-Audio
player having 6-channel output or a DVD player or
other device having 5.1 channel output.

Advertisement

Table of Contents
loading

Table of Contents