To See The Current Configuration Of The Plotter - HP DesignJet 330 User Manual

Reconfiguring the plotter

To see the current configuration of the plotter

To see the current configuration of the plotter

To see the current configuration of your plotter, print the Setup Sheet, as explained
from page 1–19. Those items on the Setup Sheet which you may change are listed
on page 1–22, together with their defaults. They are explained in the relevant
chapters of this manual, for example Page Size in chapter 3 and Graphics
Language in this chapter.
The following three items, which appear near the top right-hand corner of the
Setup Sheet, tell you the overall configuration of the plotter.
Item
RAM
SIMM
Firmware
Revision
6–2
This is the black on page 6–2 (seq: 104)
This is the cyan on page 6–2 (seq: 104)
Company confidential. Pelican User's Guide, Ed 1, Final. Freeze Status: frozen
Localization Note. .Treat as new.
Comments
This is the size, in megabytes, of the plotter's main standard
memory, plus the amount of memory reserved for printing.
D This does not correspond directly to the size of your files on
the computer, as explained on page 6–4.
D This is the total RAM, not the RAM currently free.
This tells you if an optional memory expansion module is
installed in the plotter, and its size.
This is the revision number of the plotter's internal code.