2) Service Position can be achieved by fl ipping the Digital
board to the Vertical Position as shown in Figure 4-9.
Figure 4-9
Note: The cable (just to transfer the service connection to the
MOBO board) from socket 1101 can be removed and use for
hyper terminal connection.
4.1.5
Dismantling of the Analog Board
1) Remove 5 screws 246 and 4 screws 254 and screw 230.
Figure 4-10
2) Remove 3 screws 270 and release 2 catches on the
board.
Figure 4-11
Mechanical Instructions
6
7
8
9
3139 785 31500
3) Service Position can be achieved by fl ipping the Analog
board to the Vertical Position as shown in Figure 4-10.
Figure 4-12
4.
EN 11