03 Your driving environment
Starting the engine
Models with a Personal Car
Communicator (PCC) remote key* (see
page 62)
The indicator light for approach
lighting will flash several times and
then glow continuously if all of the
03
requirements for ERS have been
met. However, this does not indicate that
ERS has started the engine.
To check if ERS has started the engine, press
the information button (3). If the engine has
started, the indicator light for buttons
(1) och (4) will illuminate.
Active functions
When the engine is started with ERS, the fol-
lowing functions are activated:
•
The climate control system
•
The infotainment system.
Deactivated functions
When the engine is started with ERS, the fol-
lowing functions are deactivated:
•
Headlights
•
Parking lights
•
License plate lights
•
Windshield wipers
*
126
Option/accessory, for more information, see Introduction.
Switching off an engine started with
ERS
Any of the following will switch off the engine
if it has been started with ERS:
•
Pressing the lock button (1) or the unlock
button (2) on the remote key
•
Unlocking the vehicle
•
Opening a door
•
Depressing the accelerator or brake pedal
•
Moving the gear selector from the P posi-
tion
•
If there are less than approx. 2.5 gallons
(10 liters) of fuel in the tank
•
More than 15 minutes have elapsed.
If the engine has been started with ERS and
switches off, the turn signals will illuminate for
3 seconds.
Message in the instrument panel
display
If ERS is interrupted, a text message will be
displayed in the instrument panel.
Switching off the engine
With the engine running, press the START/
STOP ENGINE button.
If the gear selector is not in the P position or
if the vehicle is moving, press the START/
STOP ENGINE button twice or press and
hold it in until the engine switches off.
Jump starting
Connecting the jumper cables