Playback - Sony RDR-GX210 Service Manual

QQ
3 7 63 1515 0
To stop recording
Press x. Note that it may take a few seconds for
recording to stop.
To pause recording
Press X. To restart recording, press the button
again.
To watch another TV programme while
recording
If your TV is connected to the LINE 1-TV jack, set
your TV to the TV input using the TV/DVD
button and select the programme you want to
watch. If your TV is connected to the LINE 2 OUT
or COMPONENT VIDEO OUT jacks, set the TV
t
to TV input using the (TV/video) button
(page 19).
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.
Notes
• After pressing z REC, it may take a short while to start
recording.
• You cannot change the recording mode while
recording or during recording pause.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus programme
while recording another PAY-TV/Canal Plus
programme.
Using the Quick Timer function
You can set the recorder to record in 10-minute
increments.
Press z REC repeatedly to set the duration.
Recording starts after the first press. The Quick
Timer starts from the second press, and then each
additional press increases the recording time by 10
minutes within the available free space on the disc.
Continue 10M 20M
The remaining recording time appears
momentarily on the TV screen.
The time counter in the front panel display
decreases to 0:00 (or when the disc is full), then
the recorder stops recording (power turns off).
TE
L 13942296513
44
5
Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
To stop recording, press x on this recorder.
If you connect a digital video camera with a DV
IN jack
See "DV Dubbing" (page 66) for an explanation
of how to record from the DV IN jack.
Notes
• When recording a video game image, the screen may
not be clear.
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
automatically stops recording after a few seconds.
www
.
46
http://www.xiaoyu163.com
To check the Quick Timer
z
Press REC once while recording. The
remaining recording time and other recording
information (programme position, recording
mode, etc.) appear momentarily on the TV screen.
To cancel or stop the Quick Timer
To return the recorder to normal recording mode,
z
press REC twice while recording. [Continue]
appears momentarily on the TV screen.
To stop recording, press x. Note that it may take
a few seconds for recording to stop.
To extend the Quick Timer
z
Press REC repeatedly while recording. After
the recorder returns to normal recording mode, the
recording time extends by 10 minutes (up to the
capacity of the disc).
Checking status while recording
You can check recording information such as
recording time or recording mode, etc.
Press DISPLAY during recording.
Recording information appears on the TV screen.
0:19:55 Input : Pr. 8
MONO
A Elapsed recording time
B Programme position or input source
C Recording status bar
D Audio channel
E Recording mode
F Available recording time for the disc
30M
Press DISPLAY to turn off the display.
z Hint
While recording, you can check the recording time and
other information, such as disc type/format, title/chapter
number, etc., shown in the front panel display (page 88).
x ao
y
i
http://www.xiaoyu163.com
8
Creating chapters in a title
The recorder automatically divides a recording (a
title) into chapters by inserting chapter marks at 5,
10, or 15-minute intervals during recording. Select
the interval, [5Min], [10Min], or [15Min] for
[Auto Chapter] in [Rec Setting] Setup (page 77).
z Hint
You can create chapters manually when playing a
DVD+RW, DVD-RW (VR mode), or DVD+R
(page 64).
Overwriting a recorded title
+ RW
You can use the Title List to make a new recording
over a title previously recorded on the disc. For
details about the Title List, see page 29.
1
Insert a DVD+RW.
2
Press PROG +/– or INPUT SELECT to select
a programme position or input source.
3
Press TITLE LIST to turn on the Title List.
4
Press </M/m/, to select the title you
want to overwrite.
5
Press z REC.
Recording starts.
SP 1H 40M Free
To stop recording
Press x. Note that it may take a few seconds for
recording to stop.
z Hint
If you erase a title from a DVD+RW, it appears as
[Erased title] in the Title List. However, this will not
increase the remaining time on the disc. You can select
[Erased title] from the Title List and make a new
recording on top of it (page 61).
Notes
• A protected title cannot be overwritten (page 62).
• If the selected title is shorter than the new recording, or
less than ten seconds, the recorder automatically
overwrites the next title in the Title List. If you do not
want a title to be overwritten, protect the title (page 62).
Q Q
3 6 7 1 3

Playback

Playing DVDs and VIDEO
CDs
+ RW - RW - RW
VR
Video
VCD
Z
1
Number
4
buttons
7
TOP MENU
H
1
Press Z (open/close), and place a disc on
the disc tray.
Playback side facing down
2
Press Z (open/close) to close the disc
tray.
If you inserted a DVD VIDEO or VIDEO CD,
u163
press H. Playback starts automatically
depending on the disc.
.
1-11
2 9 9 4 2 8
Recording From Connected
Equipment
+ RW - RW - RW
VR
You can record from a connected VCR or similar
device. To connect a VCR or similar device, see
"Connecting a VCR or Similar Device" (page 23).
Use the DV IN jack on the front panel if the
equipment has a DV output jack (i.LINK jack).
1
4
7
REC MODE
INPUT
SELECT
1
Insert a recordable disc.
2
Press INPUT SELECT to select an input
source according to the connection you
made.
The front panel display changes as follows:
programme
position
LINE1
DV
3
Press REC MODE repeatedly to select the
recording mode.
The recording mode changes as follows:
HQ SP EP
4
Insert the source tape into the connected
equipment and set to playback pause.
1 5 0 5 8 2 9 9 4
3
Press TITLE LIST.
For details about the Title List, see "Viewing
the Recorded Programme (Title List)" (page
29).
Example: DVD-RW (VR mode)
Title List
+ R - R DVD Original
DVD-RW
Title 1
SLP 2:45:00
Free 07/12
Title 4
13/12
2 3
4
5 6 Select a title, and press ENTER.
8 9
The sub-menu appears.
0
5
Select [Play], and press ENTER.
TITLE LIST Playback starts from the selected title on the
disc.
</M/m/,,
ENTER
To select a chapter from the Chapter List
MENU
(DVD+RW, DVD-RW (VR mode), and DVD+R
x
only)
1
Select [Chapter List] from the sub-menu in
step 5 above.
The Chapter List of the selected title appears.
For details about the Chapter List, see
page 30.
2
Select the chapter and press ENTER.
3
Select [Play] from the sub-menu, and press
ENTER.
Playback starts from the selected chapter.
To use the DVD's Menu
When you play a DVD VIDEO, or a finalized
DVD+RW, DVD-RW (Video mode), DVD+R, or
m
DVD-R, you can display the disc's menu by
pressing TOP MENU or MENU.
co
To play VIDEO CDs with PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on your
TV screen.
When you start playing a VIDEO CD with PBC
functions, the menu appears.
Select an item using the number buttons and press
ENTER. Then, follow the instructions in the menu
H
(press when "Press SELECT" appears).
9 9
+ R - R
Video
2 3
5 6
8 9
0
x
z REC
LINE2
LINE4 LINE3
SLP
2 8 9 9
, continued
45
1/7
Title 2 Title 3
0:45:00 09/12 1:00:00 10/12 0:15:00
Title 5 Title 6
0:10:00 16/12 0:10:00 19/12 0:25:00
, continued
47