Samsung SCH-R270 User Manual page 45

Voice Method
Use the Voice SVC Contacts command to view contact
information for any named contact stored in your Contacts
list by saying the name.
Note: The Lookup command shows the requested contact
information in the display but does not dial any phone
numbers for the contact.
1. In Standby mode, press and hold
Commands.
"Please say a Command" plays through the speaker,
and the VOICE COMMANDS menu appears in the
display.
2. Speak clearly and say "Contacts" followed by the full
name of the Contact you want to view, exactly as it is
entered in your Contacts list.
• If VoiceSignal recognizes the name you said, the Contact
information for that name appears in the display.
3. Say "Yes" to confirm the name or "No" to hear the
to launch Voice
4. The Contact information for the name you selected
• If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with "Did you say?" followed by
playing the command name and the first name on the list.
next name, or use the keypad to select the correct
name from the list. (For more information, refer to
"Confirm Choices" on page 101.)
appears in the display.
• To dial the default number associated with the name, press
.
–
To dial another number for this Contact, highlight the number
and press .
• To erase this entry from your Contacts list, press Erase.
• To add or change information for this entry, press Edit.
Understanding Your Contacts 41