Remote Control Operation - LG AMNH096VEA0 Service Manual

Remote Control Operation

The Remote Controller transmits the signals to the system.
5
6
4
2
7
ON OFF
11
8
13
14
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
Signal transmitter
1
3
10
CANCEL
9
SET
16
AUTO CLEAN
12
15
17
Flip-up door
(opened)
)
1 START/STOP BUTTON
Operation starts when this button is pressed and
stops when the button is pressed again.
2
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3
ROOM TEMPERATURE
SETTING BUTTONS
Used to select the room temperature.
4
INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps
low, medium, high and CHAOS.
5
JET COOL
Used to start or stop the speed cooling/heating.
(Speed cooling/heating operates super high fan
speed.)
6
CHAOS SWING BUTTON
Used to stop or start louver movement and set the
desired up/down airflow direction.
7
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping opera-
tion.
8
TIME SETTING BUTTONS
Used to adjust the time.
9 TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10 SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
11
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or
heating.
12
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13
PLASMA(OPTIONAL)
Used to start or stop the plasma-purification func-
tion.
14
RESET BUTTON
Initialize remote controller.
15
2nd F Button
Used prior to using modes printed in blue at the bot-
tom of buttons.
16
AUTO CLEAN (Model Base)
Used to set Auto Clean mode.
17 HORIZONTAL AIRFLOW DIRECTION CONTROL
BUTTON (OPTIONAL)
Used to set the desired horizontal airflow direction.
Operation
Service Manual 105